0

Tile Adhesive

Tile Adhesive
Tile Adhesive
Price And Quantity
  • 4 Bags
  • Bag/Bags
  • INR
Product Specifications
  • Powder
  • Other
  • Construction Chemical
  • Tile Adhesive
  • Apply the mixed adhesive to the prepared substrate using the appropriate notched trowel for the size of the tile being laid. A minimum of 3mm bed thickness for walls and floors must be achieved. Ensure the bedded tiles are fully supported by the adhesive with no voids underneath or behind. Lay tiles into the adhesive before it skins. The adhesive may also need to be applied tothe back of the tiles to accommodate the required levels. Do not disturb tiles until the adhesive has dried. Commence grouting after 24 hours when tilework is firm.
Product Description
GP 1000 is a rigid set, high quality cement-based adhesive suitable for most types of vitrifiled,ceramic, wall and floor tiles including natural of regular size. D GP 1000 is also suitable for renovation of interior floor and walls.
FEATURES & BENEFITS :High strength bondNo odourEconomicalWater cleanableNon toxicEasy to spreadInterior use for wall and floorthick & thin bed application
RECOMMENDED USES :ConcreteCementBrickwork
SURFACE PREPARATION :All surface must be clean, dry, and free from dust, grease, wax, oil, laitance curing compoundsand all other contaminats likely to prevent the adhesive bonding. Concrete should be allowed to cure for at least 28 days and cement to render for 7 days prior to tiling.
MIXING :20 kg D GP 1000 powder requires approximately 5 to 5.5 ltr of water per bag. Add pre-measured water to a clean mixing container and sprinkle D GP 1000 powder slowly into the liquid with constant stirring. Eliminate lumps. Mix to a thick toothpaste consistency. Allow to stand for two minutes. Then remix. The adhesive is now ready to use.
APPLICATION PROCEDURE :Apply the mixed adhesive to the prepared substrate using the appropriate notched trowel for the size of the tile being laid. A minimum of 3mm bed thickness for walls and floors must be achieved. Ensure the bedded tiles are fully supported by the adhesive with no voids underneath or behind. Lay tiles into the adhesive before it skins. The adhesive may also need to be applied tothe back of the tiles to accommodate the required levels. Do not disturb tiles until the adhesive has dried. Commence grouting after 24 hours when tilework is firm.
COVERAGE :Approx 55-60SQ.ft per 20 kg Bag using ¼’’X ¼’’ (6mmX6mm) Notch Trowel for a bed of 3mm.
Available colors : Grey
Packaging : 20 Kg
Trade Information
  • Mundra Port
  • Delivery Point (DP), Telegraphic Transfer (T/T), Cheque, Cash in Advance (CID)
  • As per Requirment Week
  • Yes
  • If order is confirmed we will reimburse the sample cost
  • Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia
  • West Bengal, Uttarakhand, Uttar Pradesh, Tripura, Telangana, Tamil Nadu, Sikkim, Rajasthan, Pondicherry, Punjab, Odisha, Nagaland, Manipur, Meghalaya, Mizoram, Maharashtra, Madhya Pradesh, Lakshadweep, Kerala, Karnataka, Jharkhand, Jammu and Kashmir, Himachal Pradesh, Haryana, Goa, Gujarat, Daman and Diu, Dadra and Nagar Haveli, Delhi, Chandigarh, Chhattisgarh, Bihar, Arunachal Pradesh, Assam, Andhra Pradesh, Andaman and Nicobar Islands, West India, East India, North India, Central India, South India, All India
Contact Us

No. 506, Parshwanath Business Park, Near Prahlad Nagar Garden, Ahmedabad, Gujarat, 380015, India
Phone :+918068096034